CALIBRATION, VALIDATION & RESEARCH
After a market analysis in terms of calibration and validation services, ReComS Group decided to complement actual services with a new division, Calibration, Validation & Research, Inc. to provide calibration, validation and metrology services in Puerto Rico and Latin America, and later expand those services to other countries.
The CVR Staff is committed to render one-of-a-kind services to the pharmaceutical, medical devices, food & drug and other industries, including the governmental sector. Those services include repair, installation, certification and validation of equipment.
Some of the advantages of this program are:
- Our Test Accuracy Ratio (TAR) of 4:1 or better is typical.
- Controlled calibration environments
- Calibration tolerances based on manufacturer’s specifications or customer requirements
- Standards traceable to NIST, equivalent national or international sources, or physical constant, as appropriate
- On-site service capabilit
Calibration Services
Consultant's Services
Advice on how to maximize performance
Calibration, Procedures, Certification, Repairs and Maintenance in general
The client receives a written notification 10 days prior to the renewal date.
Services for Emergencies
Within 24 hours for companies with a service contract.
Companies without a contract are served as soon as possible.
Training
We train your personnel in the usage of equipment.
On-site Laboratory
All repairs and calibrations are carried out either on the field or in our laboratory. Our services are available outside of Puerto Rico.
Metrology and Test Equipment Service Center
Our services include from for test equipment calibration to bench repairs. Our Metrology Department offers NIST traceable calibration. This service assigns a specific control number to the Calibration Certificate.
Calibration by Experts
Our calibrations are carried out by experienced NIST trained personnel. We deliver in compliance with ASTM and NIST procedures and requirements ANSI/NCSL 17025.
Procedures
We provide a history of change for the procedures and use specific calibration procedures.
Turn-around-time of 7 days
No matter which Calibration service option you choose, you can expect prompt and responsive service including seven day (7) turnaround on most instruments. For your convenience, pick-up and delivery service is available from many of our laboratory locations.
We are Experts in Instrument Calibration & Repair
Calibration Validation & Research, Inc., offers expert Instrument Calibration & Repair Services for all types of calibration and test equipment & measurement instruments. Extensive metrology experience is applied to every calibration we perform.
Following, a list of our NIST Traceable calibration services:
TEMPERATURE
(Range Capabilities: -196 to 600 °C)
- Temperature Recorders
- Temperature Bath (Wet)
- Temperature Bath (Dry Block)
- Temperature Calibrator
- Temperature Indicators
- Temperature Controller
- Thermistor
- Dial Thermometer
- Digital Thermometers
- Glass Tube Thermometer
- Infrared Thermometer
- Glass Thermometer(ASTM Points)
- Bi-Metallic Thermometers
- Thermocouples (Type T, K, J, M, E)
- Thermocouple Calibrator
- Transmitter
- COD Reactor
- Intelligent RTD Fixed Point or Comparison
- Muffle Furnace
- Ovens
- PRT (RTD) Calibrator (Indicator)
- PRT (RTD) Probe ITS-90 Coefficient
- Viscosimeter
HUMIDITY
(Range Capabilities: 10 to 95 +- 0.5% RH)
- Calibrator
- Chilled Mirror
- Controller
- Dew Point Indicator
- Dial Type
- Hygrometer
- Recorder
- Sensors
- Stability Cabinet
- Transmitter
TORQUE
(Range Capabilities: 0 to 600 Lb / Dead Weight: 1 gm to 500 FT-Lb)
- Torque Wrenches
- Accuforce Ametek
- Calibrator
- Force
- Screw Drivers
LIGHT
- Calibrator
- Meter
- Ovens
- Stability Cabinet
PRESSURE
(Range 1 µ IN H2O to 15,000 PSIG)
- Pressure Calibrator Analog or Electronic
- Pressure Controller
- Pressure Indicators
- Pressure Recorder
- Pressure Regulators
- Pressure Switch
- Pressure Test Gage And Vacuum
- Barometer
- Calibrator
- Dead Weight Testers
- Differential Gage
- DP Transmitter
- Magnehelic
- P/I, I/P Transducer
- Receiver Gauge
- Test Gauge
- Transducer
- Valve Positioner
FLOW
(Range: 1 ml to 400 GPM)
- Air Flow Meter
- Capacitance
- Density
- Flow Recorder
- Flow Totalizer
- Gas
- Magnetic
- Mass
- Oil Boiler Meter
- Palmer-Bowlus
- Parshall Flumes
- Ultrasonics
- V-notch
- Vortex
LEVEL
(Range: 0 to 100 ft)
- Capacitance
- DP Transmitter
- Level Transmitter
- Radar
- Ultrasonic Transmitters
BALANCES
(Range Capabilities: 1 mg to 3,000 Kg)
- Top Loading
- Scale Tank
- Microbalance
- Mechanical
- Load Cell
- Finger Lift Weight
- Electronic
- Analytical
CONDUCTIVITY & RESISTIVITY
(Range Capabilities: 0 to 20 M-Ohms)
- Transmitter
- Cell
- Calibrator
- Analyzer
ANALYTICAL EQUIPMENT
- Pocket Colorimeter
- Alkalinity
- Ammonia/Nitrogen
- Chlorine
- Chlorine & pH
- DR/100
- DR/700
- DR/800
- Fluoride
- Manganese
- Oxygen
- Ozone
- Phosphate
- Gas Analyzer
- CL2
- Oxy
- Hydrogen Sulfide
- Methane
- Hydrogen Cyanide
- Nitrogen
- Gelex
- CL2
- DR/Checks
- Secondary Standards
- Inline Process Instrument
- TOC Analyzer
- Silica Analyzer
- Particle Counter 2000 PCX
- Opticuand UV
- Hardness Monitor
- Chlorine Analyzers
- AquaTrend System
- APA 6000
- pH Meter
- Spectrophotometer
- Fluorescence
- Glass Filters
- IR Spectrophotometer
- UV/VIS Spectrophotometer
- Turbidity
- Pocket (0 to 1000 NTU)
- Process (0 to 10000 NTU)
- ICE-PIC (0.5, 1.0, 5.0, 10.0 and 20.0 NTU)
- Laboratory (0, 20, 100, 200, 800, 1000, 4000 and 7500 NTU)
LABORATORY AND PROCESS
- Oxygen Meter
- Density Meter
- Motorized Micro-liter Pipette
- Centrifugal Air Sample
- Melting Point
- HPLC Pump
- BOD Track
- Timers
ELECTRICAL
- Hand Held Multimeters
- Data Logger
- Oscilloscope
- Function Generators
- Clamp-On Ammeters
- Meggers
- Power Supplies
- Secondary Standards Multimeters
- Validator 2000
- Validator 2000 (SIM’s)
- Multifunction Calibrator
- Pulse Generator
- Frequency Counters
- Chart Recorders
- Hi-Pot Testers
- Thermocouples Calibrators
- Decade Resistance Box
- Process Calibrator
- Bench Top Multimeter
- RPM Meters
DIMENSIONAL
- Micrometers
- Calipers
- Height Gages
- Dial Indicators
- Rules
- Surface Plates Flatness
- Depth Gages
- Pin Gage Sets
- Squares
- Optical Comparators
- Microtectors
PIPETTE CALIBRATION / REPAIRS
MASS LABORATORY
Range: 1 mg to 50 kg
Validation Services
When it comes to validation services, Calibration Validation Research, Inc. (CVR) brings a vast amount of experience to the table. Our primary area of service is fulfilling validation, regulatory, compliance, and calibration services.
PROTOCOL AND MASTER PLAN DEVELOPMENT
- Validation Master Plans – Cleaning, Process, Equipment,
- Facility Basis of Design
- Control System / Computerized System Validation Protocols
- (URS) User Requirements Specifications
- (FRS) Functional Requirements Specifications
- Design Qualification Protocols
- Construction Qualification Protocols
- Equipment / System Commissioning Protocols
- Equipment Qualification (IQ, OQ and PQ) Protocols
- Process Characterization Protocols
- Process Validation Protocols
Our Validation and Calibration division offers a full range of validation services, including the following:
LABORATORY EQUIPMENT
- Balance
- Centrifugal
- Conductivity
- PH
- Turbidity
- Spectrophotometer
- DO Analyzer
- Microwave Ovens
- Air Sampler
- HPLC’s
HEAT DISTRIBUTION
- Stability Cabinet
- Stability Room
- Ovens
- Cold Room
- Bioreactors
- Rooms
- Refrigerator
- Freezers
- Cryo-Freezers
- Sterilizer(Autoclave)
HEAT DISTRIBUTION & HUMIDITY STUDY
- Stability Incubator
- Stability Room
- Ovens
- Rooms
HEAT DISTRIBUTION & PENETRATION STUDY
- Autoclaves
- Ovens
- Freezer
- Refrigerator
COMPUTER SYSTEM VALIDATION
- PLc’s-Allen Bradley, Siemens, GE
- Industrial PC’s
- SCADA Sytems- RS Batch, WonderWare, FIX DMACS
PACKAGING VALIDATION
|
